The slitter is a mechanical device that cuts wide sheets of paper, mica tape or thin film into multiple narrow materials. It is commonly used in paper making machinery, wire and cable, mica tape and printing and packaging machinery.
The price of the slitter is not cheap, and everyone wants to use the machine purchased for a longer time and more stable. But for such a purpose, routine maintenance is very important. The slitting machine should check the main parts of the automatic splitting machine before using it, and add lubricating oil. When examining the disassembly and assembly automatic splitting machine, it is forbidden to use improper tools and adopt unscientific operation methods.
In order to do a good job in the daily maintenance and maintenance of the cutting machine, we should do the following five points.
First, we should regularly clean and check the parts of the electric appliances and remove the hidden dangers in time.
Second, the use of cutting machine by slitting machine, cutting machine to complete, therefore, to use the high quality of the longitudinal cutting knife and cutting knife.
Third, the daily maintenance of the slitter should be in place, and the yardstick is smooth, clean and clear (dustless, no debris) in place, so as to ensure that the sliding part of the equipment is in good condition.
Fourth, the maintenance work is to stop the periodic and irregular inspection of the rotating parts (especially for the vulnerable parts to be monitored in real time). Regular adjustment, regular change, commutator and careful record are carried out to extend the purpose of prolonging the service life of the equipment.
Fifth, improve the technical quality and degree of the operator of the slitter. For controlling the local operation, we must be a dedicated person, without permission, no one can operate by himself.
In addition, the machine is cleaned and inspeced once every two weeks. If the automatic slicing machine is not used for a long time, all the bright surfaces must be wiped clean, coated with antirust oil and covered with plastic sleeves to cover the whole machine. If the automatic slicing machine is stopped for more than March, moistureproof paper should be covered on the rust proof oil. After the work is finished, the equipment must be carefully cleaned and the exposed surface cleaned and lubricated.